R.V.R. Elettronica PJ5KPS, User'S & Technical Manual

Page: 81 / 168

PJ5KPS
75 / 80 User & Technical Manual Rev. 1.5 - 08/02/06
9.2.4.2 SMS commands available
The commands that can be sent to the transmitter using SMS messages are the
following:
The Alarms for the RF power falling under a certain level and for the reflected power
are connected to the Settings menu. Remember to adjust SET 1 SET2 and SET 3 in
this menu to suit your need.
When all of these parameters have beenfinally configured, put the selector on the
control panel of the control unit on the “Remote” position. The yellow “LOCAL” led will
go off and the green led will go on. We suggest at this point to do some tests to verify
the functionality of the system.
&RPPDQG 5HSO\ 'HVFULSWLRQ
INFO
Station:
³VWDWLRQQDPH´
ID: ³,'QXPEHU´
FWD:
³YDOXH´
RFL: ³YDOXH´
UNBAL:
³YDOXH´
TX On ( RU TX Off RU TX StdBy)-
Low Power / Nom Power
Audio Present / Audio Absent
Alarm Present / Alarm Absent
Information about the
transmitter’s status
TXON
Station:
³VWDWLRQQDPH´
ID: ³,'QXPEHU´
TX is On -
Switching on the
transmitter
TXOFF
Station:
³VWDWLRQQDPH´
ID: ³,'QXPEHU´
TX is Off
Switching off the
transmitter
LOWPWR
Station:
³VWDWLRQQDPH´
ID: ³,'QXPEHU´
LowPwr OK-
Low Power setting
NOMPWR
Station:
³VWDWLRQQDPH´
ID: ³,'QXPEHU´
NomPwr OK-
Nominal Power setting
ALARM
Station:
³VWDWLRQQDPH´
ID: ³,'QXPEHU´
Alarm:
³OLVWRIWKHDODUPVLQPHPRU\´
List of the alarms in
memory
RESET
Station:
³VWDWLRQQDPH´
ID: ³,'QXPEHU´
ALARM RESET OK-
Resetting the alarms in
memory
RESMOD -- nothing --
Reset of the telemetry
and modem restart