PJ5KPS
16 / 80
User & Technical Manual
Rev. 1.5 - 08/02/06
5.2.1 Display LCD
The operator uses the control software of the transmitter by means of a series of
menus that are displayed on the LCD. Four specific keys are provided for scrolling
through the menus, performing the settings and giving the commands:
Pulsante
Descrizione
OK
Click this button to access a sub-menu, to enter the editing mode or to
confirm a modified value.
ESC
Click this button to exit from a menu or to cancel the modification of a
value.
Click this button to scroll inside a menu (to the right or down) or to
reduce the value of a parameter being modified.
Click this button to scroll inside a menu (to the left or up) or to increase
the value of a parameter being modified.
When the operator is not using the various buttons to navigate, the LCD displays the
preset screenful that shows the overall status of the machine's modules (Figure 5-6).
The control unit acquires, every second, the status of the other modules by means of
an RS485 serial bus. The activity at the bus is signaled by the "BUS INT" LEDs on
the unit's panel.
Figure 5-6
Default screenful
Figure 5-7
Menu select screenful
Summary of Contents for PJ5KPS
Page 1: ...PJ5KPS User Technical Manual Manifactured by Italy ...
Page 4: ...This page intentionally left blank ...
Page 6: ...PJ5KPS ii User Technical Manual Rev 1 5 08 02 06 This page was intentionally left blank ...
Page 86: ...PJ5KPS 80 80 User Technical Manual Rev 1 5 08 02 06 This page was intentionally left blank ...