Section IV - Operating Procedures
38
Quincy Compressor-QSI
®
Text on figures
(1)
Regulation
(2)
Unloading pressure 1
(3)
Loading pressure 1
(4)
Unloading pressure 2
(5)
Loading pressure 2
(6)
Modify
(7)
Pressure Band Used
(8)
Digital Pressure Band Selection
(9)
Power$ync Mode
•
The screen shows the actual unloading and loading pressure settings for both pressure bands.
To modify the settings, move the cursor to the action button Modify and press the Enter key. Following screen appears:
•
The first line of the screen is highlighted in gray. Use the Scroll keys to highlight the setting to be modified and
press the Enter key. Following screen appears:
•
The upper and lower limit of the setting is shown in gray, the actual setting is shown in black. Use the
↑
or
↓
key
of the Scroll keys to modify the settings as required and press the Enter key to accept.
If necessary, change the other settings as required in the same way as described above.
Summary of Contents for QSI Series
Page 2: ......
Page 7: ...Section I General Quincy Compressor QSI 5 MODEL IDENTIFICATION...
Page 62: ...Section IV Operating Procedures 60 Quincy Compressor QSI 1 Week Timer 2 Remaining Running Time...
Page 79: ...Section IV Operating Procedures Quincy Compressor QSI 77...
