Q-41-MSII-2-EN
7.2
02-02-21
7.2 Control system
Fig. 7.5
Fig 7.6
The control box is attached to the underside of the machine table by means of the four enclosed screws.
The mains connection is single-phase, using the three-wire cord protruding from the rear and a standard
safety plug.
The control system has peripheral functions
on the front panel
(Fig. 7.5):
1 mains switch
S1
the Mini control panel (MPF)
contents:
an LCD Display with 8 places
and 6 small keys:
M+
/
M-
C>>
/
C<<
V+
/
V-
on the rear panel
(Fig. 7.6):
sockets or connector plugs
X1
quadripole socket for connecting the motor’s stator coil
X2
nine-pole D-sub jack for connecting the motor’s increment encoder
X3
nine-pole D-sub plug for connecting set point adjuster SWG2 (Art. No. 63.012)
X4
nine-pole D-sub plug for connecting the control panel OC-TOP/AP (Art. No. 64.175)
X5
37-pole D-sub jack for connecting the process control system (keys, switches, solenoids,
solenoid valves) on the machine.
S1
