Q-41-MSII-2-EN
7.6
02-02-21
Function of the programming keys in operating mode ”parameter programming”
(key
T9
is dark, key
T10
is bright)
-
P+
/
P-
switch over of the hundreds of the parameter numbers
-
S+
/
S-
switch over of the parameter number in the switched on hundred section
-
L+
/
L-
programming of the parameter value of the switched on parameter number
Function of the keys T9 and T10 for selection of the operating mode
-
T9
dark,
T10
dark:
manual sewing
-
T9
bright,
T10
dark:
programmed sewing
-
T9
dark,
T10
bright:
parameter programming
Function of the programming keys for machine functions
-
T5
function change-over for keys
T1
…
T4
(shift key)
-
T1
chain close-off (<425> = I)
-
T5+T1
automatic change-over between program 1 and program 2 (see Item 8.2.2)
-
T2
speed during programmed sewing:
variable (treadle-controlled) when
T2
is dark or
constant (automatic) when
T2
is bright
-
T5+T2
no function
-
T3
blow chain at seam end
-
T5+T3
light barrier start
-
T4
no function
-
T5+T4
piece counter on display
-
T6
vacuum at start of seam
-
T7
vacuum at end of seam
-
T8
currently no function
-
T11
chopper at start of seam
-
T12
chopper at end of seam
-
T13
presser foot position at sewing stop
-
T14
presser foot position at end of seam
-
T15
light barrier
Caution:
After programming push key
T5
till LED goes out
The keys
T1...T15
are provided with one signal lamp each (LED). Each LED provides optical feedback
on the control position of the function assigned to each key. If the function is ON, the LED is bright; if
the function is OFF, the LED is dark.