QUICK-ROTAN MINI-STOP Q41MSII, Instruction Manual

Page: 33 / 38

Q-41-MSII-2-EN 9.13 02-02-21
Programming Level B
In order to access parameters on programming level B, proceed as described below when turning power on:
- Turn OFF power switch S1
- Press and hold key M+ and V+ simultaneously
- Turn ON power switch S1
⇒
Indication 1 shows „ B “ in its extreme righthand (8th) digit.
Use keys M+ or M- to advance to Indication 4.
Programming of Control Parameters
Programming Procedure
- Use keys C>> or C<< to make digits blink; sewing is not possible.
- Use keys V+ or V- to increase or decrease the number of blinking digits.
- Use keys M+ or M- to cause blinking to stop; sewing is possible again.
Programming Level C
In order to access parameters on programming level C, at first take preparatory action on programming level B
by changing parameter (software switch) 798 to I (<798> = I). Then either change display by actuating keys
M+
or M- or call up a different parameter by actuating keys C>> or C<< and V+ or V- .
Now turn the power switch OFF and immediately ON again.
⇒
Indication 1 shows „C“ in its extreme righthand (8th) digit.
Use keys M+ or M- to advance to Indication 4.
This activates programming level C.
Programming level C includes all parameters (including those on levels A and B).
B 6 104
B
104 8
B 104 8
B 1 0 6 1
B 1 60 1
B 1 0 1
B 1 6 1 0
0 B4 00
607
0 B4 00 607
0 B4 00 607
0 B4 00 607
2 B3 00 607 2 B3 00 607
C
<< << << << <<
C
>> >> >> >> >>
C
<< <<
<< << <<
C
>> >>
>> >> >>
V
−−−−−
V
+++++
V
−−−−−
V
+++++
C
<< <<
<< << <<
C
>> >>
>> >>
>>
V
+++++
V
−−−−−
M+/-
M+/-
M+/-
M+/-
M+/-
M+/-