Preparing for the Installation
3
Scalar 50 Tape Library
These environmental conditions apply when the Scalar 50 tape library is in operation.
Preparing for the Installation
Before you begin the installation procedure in this section, make the following
preparations as described in this section:
•
Providing Necessary Tools
•
Taking ESD Precautions
Providing Necessary
Tools
0
Provide the following tools for unpacking and installing the Scalar 50 tape library:
• #1 Phillips screwdriver
• #2 Phillips screwdriver
• #1 flat blade screwdriver
• Allen wrench (2.5mm and 3mm) included in accessory kit
• Antistatic wrist strap included in accessory kit
Taking ESD Precautions
0
Some components within the Scalar 50 tape library contain static-sensitive parts. To avoid
damaging these parts while performing installation procedures, always observe the
following precautions:
• Keep the Scalar 50 turned off during all installation procedures.
• Use an antistatic wrist strap (included in the accessory kit).
• Keep static-sensitive parts in their original shipping containers until ready for
installation. Look for the ESD sticker to identify static sensitive parts.
• Avoid touching connectors and other components.
Note:
For additional specifications, refer to the
Quantum Scalar 50 Series User’s Guide
(PN 81-81768)
Note:
Dry climates and cold-weather heating environments have lower relative
humidity and are more likely to produce static electricity.