![background image](http://html2.mh-extra.com/html/quantum/scalar-50/scalar-50_quick-start-manual_3560451039.webp)
Testing the Library Configuration
39
Scalar 50 Tape Library
Testing the Library Configuration
After you have completed the library installation, you must test the configuration to
ensure proper operation.
Testing the library configuration consists of the following steps:
•
Running a Health Check
•
Testing a Multiple Library Stack Configuration
Running a Health Check
0
Running a health check will verify all robotics axis and ensure that the library is operating
normally.
To run a health check:
1
On the host computer, open the internet browser software.
2
In the
Address
field, type
http://IPaddress/
where IP address is the IP address for the
Quantum Scalar 50.
3
Enter the username and password and click
OK
.
The
Overview
page displays (see
figure 39
):
Figure 39 Overview Page
4
Click the
Utilities
tab.
The
Utilities
page displays (see
figure 40
).
Note:
The default username and password is
admin
.
Utilities tab