30
Installing the Library
Scalar 50 Quick Start Guide
Figure 27 Date and Time
Screen
The
Date and Time
screen displays the following information about the library:
2
Use the up and down arrows to view or edit the time zone, date, and time
information. Press
Enter
to accept the new settings.
3
When you are finished viewing/editing the date and time information, press
Exit
to
return to the
Setup
screen.
Setting Network Information
0
To view or edit the network information:
1
From the
Setup
screen, use the up and down arrows to highlight
Network
and press
Enter
.
The
Network
screen displays (see
figure 28
):
Figure 28 Network Screen
The
Network
screen allows you to view or edit the following network settings:
• DHCP (default setting)
• IP address
• Subnet mask
• Default gateway
2
Use the up and down arrows to select the network setting you wish to view or edit
and press
Enter
.
When you are finished viewing/editing the network information, press
Back
, then
Exit
to return to the
Setup
screen.
Note:
If you are using DHCP, you do not have to setup the following network
information. Once the library is on-line, it is ready to use.
Note:
The library must be offline to change these settings.
