![background image](http://html2.mh-extra.com/html/quantum/scalar-50/scalar-50_quick-start-manual_3560451004.webp)
4
Unpacking the Scalar 50 Tape Library
Scalar 50 Quick Start Guide
Unpacking the Scalar 50 Tape Library
This section explains how to unpack the Scalar 50 tape library and move it to its final
installation location.
By following these instructions, you help ensure that the system will continue to be
safeguarded after it arrives at the installation site.
Unpack and remove the following components from the packing materials (see
figure 2
):
1
Remove the accessories kit and set it aside. The accessories kit contains all of the parts
necessary for installing the Scalar 50 in a rack..
2
With the help of a second person, lift the library chassis up and out of the shipping
carton.
3
Place the library on a table approximately waist high.
Note:
Inspect the outer library packaging for damage. If there is any damage evident
on the library packaging, do not continue with the installation and contact
Quantum customer support.
Note:
Unpack the library as close to the installation location as possible.
Warning:
At least two people are required to move the library chassis.
Caution:
Lift the library chassis at the sides. Avoid putting the weight of the
library chassis on the front bezel.