manualshive.com logo in svg

Quantum Scalar 1000, Reference Manual, Page: 163 / 304

Share
Download
Quantum Scalar 1000 Reference Manual Download Page 163

Scalar DLC Reference Guide

147

SCSI Client

There are five sets of properties associated with the SCSI Client.

•

Properties. Main client properties. Refer to 

Properties

 on page 148.

•

Mode. SCSI mode parameters. Refer to 

Mode

 on page 150.

•

Drives. The library drives as they are seen from the client side. Refer to 

Drives

 on page 152.

•

I/E slots. The library I/E slots as they are seen from the client side. Refer to 

I/E Slots

 on page 153.

•

Storages. The library storages as they are seen from the client side. Refer to 

Storages

 on page 154.

Button

Icon

Operation

Description

Add new 
Client

Click

Pop-up client creation window appears. Refer to 

Create SCSI 

Client

 on page 155.

Enable

Click

Enable SCSI Interface.

Disable

Click

Disable SCSI interface.
The following commands are serviced in the regular way then:

•

Inquiry

 for the 

Standard Inquiry Data

 page

• Request Sense

•

Report LUNs

 (SCSI-3 mode) 

All other commands and the 

Inquiry

 command for other pages 

are rejected with the CHECK CONDITION SCSI status, and

 

02/04/00 “Not ready due to unknown cause” SCSI sense data.

Help

Click

Open online help for the current pane.

Note

Only administrator users can modify or remove clients. For the user without 
administrative privileges, the operation buttons are disabled.

Summary of Contents for Scalar 1000

















































































































































































































































































































Reviews:

No comments