Quantum Scalar 1000 Reference Manual Download Page 151

Page: 151 / 304

Scalar DLC Reference Guide

135

DAS

The DAS Interface needs no pre-configuration.

Figure 98

DAS Interface Pane

DAS Client

There are four sets of properties associated with the DAS Client:

•

Properties. The basic client properties, statistics, and operational settings. Refer to

Properties

page 136.

•

Drives. The list of drives that are reserved for the clients and that are defined for the selected client.
Refer to

Drives

on page 138.

Button

Icon

Operation

Description

Add new
Client

Click

Pop-up client creation window appears. Refer to

Create DAS

Client

on page 144.

Enable

Click

Enable DAS Interface.

Disable

Click

Disable DAS interface. All requests send by DAS Clients will
receive ‘interface is disabled’ error.

Help

Click

Open online help for the current pane.

Summary of Contents for Scalar 1000

















































































































































































































































































































Search results

Summary of Contents for Scalar 1000

Reviews:

Related manuals for Scalar 1000

Brands by name

Popular brands

Quantum Scalar 1000, Reference Manual

Search results

Summary of Contents for Scalar 1000

Reviews:

Related manuals for Scalar 1000

Brands by name

Popular brands