![background image](http://html2.mh-extra.com/html/quantum/p1000-series/p1000-series_unpacking-instructions-manual_3844679029.webp)
ATL P1000 Series Library Unpacking Instructions
Document 6221100-02, Ver. 2, Rel. 0
March 1999
Removing the Internal Packing Materials
29
Figure 19 Removing the
Load and Bulk Packs
Removing the
Shipping Restraint
19
To remove the shipping restraint:
Note:
The shipping restraint that protects the extension axis assembly is
attached to the bottom drive shelf and fits over the supports for the
load and bulk packs.
Procedure
1
Grasp the front edge of the shipping restraint and carefully push
inward at both corners while lifting it up at an angle (see figure 20).
The tab on the shipping restraint (between the mounting blocks for
the load and bulk packs) pops up, releasing the shipping restraint
from the load pack shelf. The back of the shipping restraint
unhooks from the bottom drive shelf.
2
Lift the shipping restraint off the extension axis assembly.
3
Raise the extension axis assembly and remove the foam block
beneath it.
4
Lower the extension axis assembly to its normal position on the
floor of the library.
Note:
Retain the original shipping container and shipping bag, pallet,
ramp, accessories tray, and all packing materials for future use.
Handles