ATL P1000 Series Library Unpacking Instructions
Document 6221100-02, Ver. 2, Rel. 0
March 1999
28
Removing the Internal Packing Materials
Removing the Internal Packing
Materials
18
This section explains how to remove the internal packing materials
that protect the library during shipping and installation.
Caution:
Before removing the internal packing materials, verify that
the library is at its final installation site. Moving the library
without these materials in place may damage the library.
Caution:
Take precautions to prevent electrostatic discharge
whenever you remove the library enclosure or open the
library doors.
Opening the Doors
18
To open the library doors:
Procedure
1
Locate the key in the accessories kit and unlock the front door of
the library.
2
Open the left door first, then open the right door.
Removing the Load
and Bulk Packs
18
To remove the load and bulk packs (see figure 19):
Procedure
1
Grip the load pack handles and squeeze them together.
This releases the latches securing the load pack.
2
Still holding the load pack handles, pull the load pack forward and
out of the library.
3
Repeat steps 1 and 2 to remove the bulk pack.