![background image](http://html2.mh-extra.com/html/quantum/p1000-series/p1000-series_unpacking-instructions-manual_3844679022.webp)
ATL P1000 Series Library Unpacking Instructions
Document 6221100-02, Ver. 2, Rel. 0
March 1999
22
Removing the Library from the Pallet
Removing the Library from the Pallet
13
This section provides separate procedures for the stand-alone and
rack-mount libraries:
‡
To remove a stand-alone library from the pallet, see the following
section, “Removing a Stand-alone Library from the Pallet.”
‡
To remove a rack-mount library from the pallet, see “Removing a
Rack-mount Library from the Pallet” on page 24.
Warning:
Two people should perform steps that involve lifting or
guiding the library. Use safe practices when lifting or
guiding the library and handling the slide assembly or the
ramp.
Removing a
Stand-alone Library
from the Pallet
13
To remove a stand-alone library from the pallet:
Procedure
1
Remove the plastic bag enclosing the P1000:
a
Cut along the front seam of the plastic bag.
b
Continue to cut all the way to the back of the library.
c
Fold the bag out of the way.
2
Remove the foam supports from between the library and the pallet
(see figure 14).