![background image](http://html2.mh-extra.com/html/quantum/p1000-series/p1000-series_unpacking-instructions-manual_3844679020.webp)
ATL P1000 Series Library Unpacking Instructions
Document 6221100-02, Ver. 2, Rel. 0
March 1999
20
Installing the Slide Assembly in the Rack
Figure 13 Loosening the
Inner Nuts
Procedure (continued)
3
When the slide assembly tray is in the desired position, tighten all
inner nuts:
a
Extend the slide assembly out of the rack until both the
intermediate and inner channels of the slide rails lock (see
figure 12).
This allows you to access the front screws.
b
Tighten each of the front nuts by holding the nut with an
11/32 inch open-ended wrench and then tightening its
corresponding screw with a Phillips screwdriver.
c
Press on the inner channel locks to release them (see figure 12).
d
Push the slide assembly back into the rack until the access hole
on the outside of the inner channel exposes a screw.
Inner nuts
Inner nuts