![background image](http://html2.mh-extra.com/html/quantum/dxi6900-s/dxi6900-s_field-service-manual_3779929028.webp)
Chapter 1: Basic Operations
DXi6900-S Array and Expansion Modules
Quantum DXi6900-S Field Service Manual
15
Array and Expansion Module Hard Drive Carrier
Indicators
The individual hard drive sleds contain LEDs that indicate the health condition of the hard drive (see
).
Figure 9:
Hard Drive Sled LEDs
1
2
3
Table 1:
Hard Drive Sled LEDs
LED
Description
LEDs off
Solid
– It is safe to remove the hard drive from the array for service.
Drive service action allowed
LED (blue)
Solid
– It is safe to remove the hard drive from the array for service.
Drive fault (amber)
Solid
– The hard drive has failed and a service ticket is created. Contact
Quantum customer support.
Blinking
– Drive volume or Array module locate function.
Drive active LED (green)
Solid
– No activity on the hard drive.
Blinking
– There is activity on the hard drive.
Note:
It is normal to see drive activity even when the DXi is not reading or
writing data.
Caution:
Do not remove a hard drive that has not failed. Instead, only remove a drive that has failed. If
you accidentally remove a good drive, wait 30 seconds before reinserting the drive.
Array Module Rear Panel Indicators
LED indicators and buttons are located on the back of the Array modules (RBODs) (see
).