![background image](http://html2.mh-extra.com/html/quantum/dxi6900-s/dxi6900-s_field-service-manual_3779929190.webp)
Chapter 3: FRU Removal and Replacement Procedures
Additional Removal and Replacement Procedures
Quantum DXi6900-S Field Service Manual
177
Caution:
Ensure that the cables are correctly installed and retained by the cable retention bracket
before installing the cooling fan assembly. Incorrectly installed cables may get damaged.
1. Align the cooling fan assembly slots with the guide pins on the chassis (see
).
2. Slide the cooling fan assembly into the chassis.
3. Lock the cooling fan assembly into the chassis by rotating the blue release levers downward until firmly
seated.
Removing and Installing the PCIe Card Holder
To remove and replace the PCIe card holder, refer to the following procedures:
l
Removing the PCIe Card Holder below
l
Replacing the PCIe Card Holder on the next page
Removing the PCIe Card Holder
To remove the PCIe card holder:
1. Press the release tab and the touch-point to release the PCIe card holder from the chassis (see
).
2. Lift the PCIe card holder out of the chassis.
Figure 130:
Removing and Installing the PCIe Card Holder
1
2