Chapter 3: FRU Removal and Replacement Procedures
Replacing the Node Chassis
Quantum DXi6900-S Field Service Manual
137
Obtaining a Replacement Node Chassis
Before beginning the replacement procedure, make sure that you have the required replacement kit. The
appropriate replacement Node chassis will be provided by Quantum Customer Support (see
).
You will need the following items to perform this procedure:
l
Replacement Node chassis kit provided by Quantum Customer Support.
l
Masking tape and felt tip marker (for temporarily labeling drives)
l
ESD grounding wrist strap (included in the replacement kit)
Figure 92:
DXi6900-S Node Chassis
Illustration
Description
Replacement Node chassis
Replacing the Node Chassis
This section describes how to remove and replace the DXi6900-S Node chassis. There are several items
within the Node chassis that are not replaceable as individual FRUs. If any of these components fail, the
entire Node chassis must be replaced.
Caution:
Use appropriate ESD precautions, including the use of a grounding strap, when performing
this procedure.
Removing and replacing the DXi6900-S Node chassis includes the following steps:
l
Removing a Failed Node Chassis below
l
Removing a Failed Node Chassis below
Removing a Failed Node Chassis
To remove the DXi6900-S Node chassis:
Turning Off the DXi6900-S on page 21
).
