Chapter 3: FRU Removal and Replacement Procedures
Replacing Node CMOS Battery
Quantum DXi6900-S Field Service Manual
90
Figure 59:
CR2032 CMOS Battery
Illustration
Description
CR2032 CMOS battery (lithium-ion).
Replacing a Node CMOS Battery
This section describes how to remove and replace a CMOS battery in the DXi6900-S Node.
Caution:
Use appropriate ESD precautions, including the use of a grounding strap, when performing
this procedure.
Removing and replacing a CMOS battery the Node includes the following steps:
l
Identifying a Failed CMOS Battery below
l
Removing a Failed CMOS Battery from the Node on the next page
l
Installing a Replacement CMOS Battery in the Node on page 92
Identifying a Failed CMOS Battery
To identify a failed CMOS battery in the DXi6900-S Node:
1. Log on to the remote management console as the service user (see
Accessing Remote Management on
).
2. Navigate to the
Status > Hardware > Summary
page, and then click
System Board
.
The
System Board Details
window displays.
3. Note if the CMOS battery has a
Failed
).
