![background image](http://html1.mh-extra.com/html/quantum/dlttape-dlt1/dlttape-dlt1_interface-manual_4076676168.webp)
Chapter 5: Supported SCSI-2 Medium Changer Device Commands
5-2
July 2004
81-81276-01 Rev A01
The rest of this chapter discusses commands that are unique to medium changers.
5.1
INITIALIZE ELEMENT STATUS (07h)
The INITIALIZE ELEMENT STATUS command causes the medium changer to initialize the element
status.
Figure 5-1
shows the data format for the command.
Figure 5-1.
INITIALIZE ELEMENT STATUS (07h) — Data Format
5.2
MODE SENSE/SELECT (1Ah/15h)
The tape drive supports all three pages that are specific to Medium Changers.
Bit
Byte
7
6
5
4
3
2
1
0
0
Operation code (07h)
1
Logical Unit Number
Reserved
2 - 4
Reserved
5
Unused
Reserved
Flag
Link
Summary of Contents for DLTtape DLT1
