Chapter 4: SCSI Commands
4-38
July 2004
81-81276-01 Rev A01
Parameter Block: Parameter Codes 02h through 09h
Figure 4-21.
Read / Write Bytes Transferred Log Page — Data Format
Bit
Byte
7
6
5
4
3
2
1
0
0 - 1
(MSB)
Parameter Code
(LSB)
2
DU
DS
TSD
ETC
TMC
Rsv’d
LP
3
04h
4 - 7
(MSB)
Counter Value
(LSB)
Table 4-22.
Read / Write Bytes Transferred LOG SENSE Page — Field Descriptions
Field Name
Description
Parameter Control Byte – DU, DS, TSD, ETC, TMC, and LP are collectively referred to as the Parameter
Control Byte.
DU
Disable Update. This bit is always 0.
DS
Disable Save. Since the tape drive does not support
saving parameters, this bit is always 1.
TSD
Target Save Disable. Since the tape drive does not
support saving parameters, this bit is always 1.
ETC
Enable Threshold Comparison. The tape drive does not
support Threshold Checking on this page. This bit is
always 0.
TMC
Threshold Met Criteria. This bit is always 0.
LP
List Parameter. This bit is always 0 since the tape drive
treats the parameter codes as data counters.
Summary of Contents for DLTtape DLT1
