![background image](http://html1.mh-extra.com/html/quantum/dlttape-dlt1/dlttape-dlt1_interface-manual_4076676092.webp)
Chapter 4: SCSI Commands
4-50
July 2004
81-81276-01 Rev A01
Table 4-30.
Read / Write Error Recovery Page (01h) — Field Descriptions
Field Name
Description
TB
Transfer Block. This block (when not fully recovered) function is not supported.
EER
Enable Early Recovery. This function is always enabled.
PER
Post Error. This bit turns on reporting of CHECK CONDITIONS to report
recovered Read / Write errors. The default value of this bit is 0.
DTE
Disable Transfer on Error. This feature is not supported, so this bit must be 0.
DCR
Disable ECC Correction. This bit feature is not supported, so this bit must be 0.
Read Retry Count
This field reports the maximum number of times the tape drive tries to reread
before declaring an unrecoverable error.
Write Retry Count
This field reports the maximum number of times the tape drive tries to overwrite
before declaring an unrecoverable error.
Summary of Contents for DLTtape DLT1
