Quantum DLTtape DLT1, Interface Manual

Page: 146 / 182

Chapter 4: SCSI Commands
4-104 July 2004 81-81276-01 Rev A01
04h HARDWARE
ERROR (continued) 3B 0E
Media Source Element Empty
a
40 80
Diagnostic/POST Failure, ROM EDC Error
b
40 81
Diagnostic/POST Failure, RAM Failure
b
40 82
Diagnostic/POST Failure, Bad Drive Status
b
40 83
Diagnostic/POST Failure, Loader Diagnostics Failure
b
40 84
Diagnostic/POST Failure, POST Soft Failure
b
44 00 Internal Target Failure
44 83 SCSI Chip Gross Error/ Illegal – Command Status
44 84 Unexpected/Unexplained Residue Count in Transfer Register
44 85 Immediate Data Transfer Timeout
44 86 Insufficient CDB Bytes
44 87 Disconnect/SDP Sequence Failed
44 88 Bus DMA Transfer Timeout
44 8A Over Temperature Condition
44 C1 EEPROM Copy 1 Area Bad
44 C2 EEPROM Copy 2 Area Bad
44 C3 Both EEPROM Copy Areas Bad
47 00 SCSI Parity Error
48 00 IDE Message Received
51 00 Erase Failure
53 00 Media Load/Eject Failure
53 01 Unload Tape Failure
Table 4-61.
Supported SK, ASC, and ASCQ (Hex) in Response to the REQUEST SENSE
Command (Continued)
SK ASC ASCQ Description