Quantum DLTtape DLT1, Interface Manual

Page: 149 / 182

DLT1/VS80 SCSI Interface Guide
81-81276-01 Rev A01 July 2004 4-107
0Bh ABORTED
COMMAND 2F 00 Commands Cleared by Another Initiator
43 00 Message Error
44 80 Unexpected Selection Interrupt
44 82 Command Complete Sequence Failure
44 83 SCSI Chip, Gross Error/ Illegal – Command Status
44 84 Unexpected/Unexplained Residue Count in Transfer Register
44 87 Disconnect Sequence Failed
44 89 Command Cleared from Queue Without Other
45 00 Select/Reselect Failure
47 00 SCSI Parity Error (check SCSI bus configuration and
connections)
48 00 IDE Message Error
49 00 Invalid Message Error
4B 00 Data Phase Error
4E 00 Overlapped Commands Attempted (queue tag is not unique, CDB
sent with abort tag message, or untagged, or untagged CDBs are
outstanding)
83 00 Can not Retry Read / Write Data Transfer (a Read / Write Data
Transfer was aborted due to a bus parity error or unexpected ATN.
0Dh VOLUME
OVERFLOW (No Additional Sense Code or Sense Code Qualifier)
0Eh MISCOMPARE (No Additional Sense Code or Sense Code Qualifier)
a.
Command is specific to medium changers.
b.
Contact a service representative.
c.
Bad firmware image or code download possible.
Table 4-61.
Supported SK, ASC, and ASCQ (Hex) in Response to the REQUEST SENSE
Command (Continued)
SK ASC ASCQ Description