![background image](http://html1.mh-extra.com/html/quantum/dlttape-dlt1/dlttape-dlt1_interface-manual_4076676170.webp)
Chapter 5: Supported SCSI-2 Medium Changer Device Commands
5-4
July 2004
81-81276-01 Rev A01
5.3
MOVE MEDIUM (A5h)
The MOVE MEDIUM command moves data cartridges from the tape drive to the magazine slot it
came from or from any magazine slot to the tape drive.
The Transport Element Address field must be 0 or 1.
Figure 5-3
shows the data format for the
command.
Figure 5-3.
MOVE MEDIUM (A5h) — Data Format
5.4
READ ELEMENT STATUS (B8h)
The SCSI-2 specification defines the format of Element Status data. The following sections show the
information returned for the medium changer. The Element Status data consists of a header and one or
more Status Pages for each element type. The Status Pages consist of a header and one or more
element descriptors, one for each element address. The data shown assumes the CDB was specified in
such a way that all descriptors for a given element type would be returned.
Bit
Byte
7
6
5
4
3
2
1
0
0
Operation Code (A5h)
1
Logical Unit Number
Reserved
2 – 3
(MSB)
Transport Element Address
(LSB)
4 – 5
(MSB)
Source Address
(LSB)
6 – 7
(MSB)
Destination Address
(LSB)
8 – 10
Reserved
11
Unused
Reserved
Flag
Link
Summary of Contents for DLTtape DLT1
