Preliminary
2-14
September 21, 1999
BENCHMARK
T A P E
S Y S T E M S
8. Secure your DLT1 drive with the appropriate mounting screws, either in the sides or
bottom of the drive sled, as appropriate for the server or workstation chassis.
Figure 2-11: Secure DLT1 Drive in Installation Bay (Side Mounting Screws Shown)
9. Replace the cover on the server or workstation.
10. Attach the power cables to the server or workstation and all attached accessories.
11. Turn on the host server or workstation and allow its operating system to start.
Refer to the next section to learn about your DLT1 internal drive’s self-test and initialization
features.
