Preliminary
2-13
September 21, 1999
BENCHMARK
T A P E
S Y S T E M S
Note:
If your SCSI host adapter already has a ribbon cable with an open 68-pin connector,
you can use the existing cable instead of the cable supplied with your DLT1 internal drive.
5. Locate the SCSI ribbon cable in the accessories package. Attach one end of the SCSI
ribbon cable to the SCSI connector on the rear panel of your DLT1 internal drive. The
SCSI connectors are keyed, preventing improper connection.
Note:
Refer to page 2-9 to determine if you need to use an inline LVD/SE terminator with
the SCSI cable.
6. Attach the other end of the SCSI ribbon cable to the SCSI host adapter, aligning the
colored stripe on the ribbon cable with pin 1 on the SCSI host adapter’s connector.
7. Locate an available power cable in the host server or workstation and attach it to the
power connector on the rear panel of your DLT1 internal drive. The connectors are
keyed, preventing improper connection.
Figure 2-10: Attach SCSI and Power Cables to your Internal Drive
SCSI Cable (Shown
with Inline Terminator
Installed)
Power Cable
