Preliminary
2-17
September 21, 1999
BENCHMARK
T A P E
S Y S T E M S
Symptom Problem
Solution
The SCSI bus might be
improperly terminated
1. If your DLT1 drive is the last or
only device on the SCSI bus, make
sure the drive is properly
terminated.
2. If your DLT1 drive is not the last
or only device on the SCSI bus,
check all SCSI cable connections
and make sure the last device on
the SCSI bus is terminated.
There are fatal or non-fatal
errors for which you cannot
find the cause.
The AC power source may
not be properly grounded
(DLT1 Desktop Drive only).
1. Plug the DLT1 Desktop Drive’s
power cable into a power outlet on
the same circuit as the host server
or workstation.
2. Plug the DLT1 Desktop Drive’s
power cable into a different power
outlet.
Table 2: POST Troubleshooting
