Quantum ATL 7100, Installation Manual

Page: 51 / 68

Appendix A SCSI Cabling Options
Single-Wire Configuration
Quantum|ATL 7100 Series Facilities Planning and Installation Guide 35
Single-Wire Configuration
1
This configuration of the library has all of the SCSI devices on a
single SCSI bus from the host controller. The host SCSI bus
connects to the rear panel connector labeled
SCSI PORT 1 and is
externally terminated at the connector labeled
SCSI PORT 4 (
see
figure 12 ).
The rear panel connectors labeled SCSI PORT 2 and SCSI PORT 3
are not used in this configuration.
Note:
The spare SCSI cable from the accessories kit is required
to configure the library in a single-wire configuration.