![background image](http://html2.mh-extra.com/html/quantum/atl-7100/atl-7100_installation-manual_3563446064.webp)
Glossary
48
Quantum|ATL 7100 Series Facilities Planning and Installation Guide
The diagnostic port (
DIAG
), on the rear of the library, uses this
protocol.
extension axis assembly
Mounted onto the vertical axis, the
extension axis assembly consists of the gripper assembly and the
horizontal axis on which the gripper assembly is mounted.
extension axis belt
A drive belt connecting the extension motor/
gearbox to the gripper assembly.
F
FCC Class A
A standard established by the U.S. Federal
Communications Commission governing electromagnetic
emissions in a commercial environment.
FSA
Fixed Storage Array. A 3-column by 32-row fixture mounted
inside the library. It hold up to 96 cartridges.
FSE Field Service Engineer
G
gripper assembly
An assembly that mounts on the extension axis
and grips cartridges; referred to as the gripper.
H
horizontal belt
A drive belt connecting the horizontal motor to the
horizontal axis assembly.
host or host computer
A computer that issues SCSI commands to
control the library robotics.
L
LCD
Liquid Crystal Display.
load port
An operator accessible component that imports or
exports cartridges from within the library.
M
MTBF
Mean Time Between Failures.
MTTR
Mean Time To Repair.
N
native mode
The uncompressed storage capacity of a tape
subsystem. A TZ289N tape drive can store 35 GB in native mode
and 70 GB with 2:1 compression.
NVRAM
Non-Volatile RAM.
Summary of Contents for ATL 7100
