Quantum Data 801GC, 801GF, 801GX, Owner'S And Programmer'S Manual

Page: 329 / 356

8-21
4008 Invalid delay time in sequence
A command file containing a sequence step delay was
downloaded to the generator.
■
Only use delay times (in seconds) that correspond to
the list of available delays.
4010 Font index out of range
You tried to use a font at an invalid index.
4020 No font present at given index
You tried to access a font at a valid index but the specified
index is empty because of a previous delete.
4030 Invalid font location
You tried to install a font that has not been transferred to
memory.
4576 Can’t convert to inches, not valid units
The format unit (inches or millimeters) is unknown because
a new format was not initialized before it was created.
Conversion between the format’s unit and the user’s
preference fails.
■
Always use the FMTN command before editing a new
format.
4579 Can’t convert to mm, not valid units
The format unit (inches or millimeters) is unknown because
a new format was not initialized before it was created.
Conversion between the format’s unit and the user’s
preference fails.
■
Always use the FMTN command before editing a new
format.
5002 No directory memory
This occurs during DIRN and NAMI commands when there’s
an insufficient amount of managed memory for the buffer
request.
■
Save all used edit buffers and issue FMTN, IMGN,
and/or DIRN. This clears extra memory being used
by these buffers.