manualshive.com logo in svg

Quantum Data 801GC, 801GF, 801GX, Owner'S And Programmer'S Manual

The Quantum Data 801GC, 801GF, and 801GX user manuals are essential resources for owners and programmers. Discover in-depth instructions and detailed information in these manuals available for free download on our website. Unlock the full potential of your product with our comprehensive manuals. Visit manualshive.com to access them instantly.

Share
Download
background image

6-57

malfunctioning. The “Making Connection” chapter
has information on display codes that are used by
some systems.

A format can be programmed to check these lines
and report the results to the operator.

The DCBM parameter determines which of up to 4
sense lines will be tested. A value of 15 will test all
4 lines. A value of 7 will test 3.

The DCEX parameter is the display code number
that you are expecting to get back from a particular
display. The actual value that is read back is shown
in the “Format” test image.

❖

The 801G* does not use the display code data to
change its own operating modes. The DCBM and
DCEX parameters are only used to provide in-
formation to the operator so that they may com-
pare the expected and actual results.

Outputs Control

The last set of format parameters allow you to de-
termine which outputs are active when the operator
first selects the format from memory.

❖

In the current version of firmware, the status of
the “Outputs” button has priority over individual
gating controls. Selecting a format while the
outputs are turned off will keep all of the out-
puts off until the button is pressed. Selecting a
format while the outputs are turned on will ac-
tivate all of the outputs that have been gated on
in the format.

Summary of Contents for 801GC, 801GF, 801GX





































































































































































































































































































































































Reviews:

No comments

Related manuals for 801GC, 801GF, 801GX

iDance Cube Nano cn1 Instruction Manual preview
Cube Nano cn1
Brand: iDance Pages: 9
Magnavox MPD820 - DVD Player - 8 User Manual preview
MPD820 - DVD Player - 8
Brand: Magnavox Pages: 42
Wacker Neuson GV 7003A Operator'S Manual preview
GV 7003A
Brand: Wacker Neuson Pages: 52
K&S BASIC KSB 30i S Owner'S Manual preview
KSB 30i S
Brand: K&S BASIC Pages: 13
Sylvania SDVD7029 Instructions Manual preview
SDVD7029
Brand: Sylvania Pages: 24
QFX PBX-1212 User Manual preview
PBX-1212
Brand: QFX Pages: 11
Generac Power Systems GP Series 005938-0 Owner'S Manual preview
GP Series 005938-0
Brand: Generac Power Systems Pages: 56
Briggs & Stratton 040661 Installation And Operation Manual preview
040661
Brand: Briggs & Stratton Pages: 74
GE 040324 Operator'S Manual preview
040324
Brand: GE Pages: 88
ILX Lightwave LDX-3207 Instruction Manual preview
LDX-3207
Brand: ILX Lightwave Pages: 55
Daihen OTC AC/MIG/201 CPDACA-200 Owner'S Manual preview
OTC AC/MIG/201 CPDACA-200
Brand: Daihen Pages: 48
A-iPower SUA4000i Owner'S Manual preview
SUA4000i
Brand: A-iPower Pages: 40
Pioneer PDV-10 Operating Instructions Manual preview
PDV-10
Brand: Pioneer Pages: 128
Toshiba SDP77SWB Owner'S Manual preview
SDP77SWB
Brand: Toshiba Pages: 7
Toshiba SDP74S Specifications preview
SDP74S
Brand: Toshiba Pages: 2
Toshiba SDP72S Specifications preview
SDP72S
Brand: Toshiba Pages: 2
Toshiba SD-P75S Specifications preview
SD-P75S
Brand: Toshiba Pages: 2
Toshiba SDP93S - SD DVD Player Owner'S Manual preview
SDP93S - SD DVD Player
Brand: Toshiba Pages: 88

Brands by name

Popular brands

Load more brands