6-85
Miscellaneous System Parameters
The queries in this category are used to help iden-
tify the exact configuration of the generator.
*IDN
IDeNtification (listed under “I”)
VERF
VERsion of Firmware
VERH
VERsion of Hardware
Direct Processor Control (Reserved)
These commands and queries are used to communi-
cate directly with the generator’s microprocessor and
its internal functions. They are reserved for system
debugging and diagnostics by Quantum Data per-
sonnel as well as for special software applications
developed by Quantum Data.
Note – Indiscriminate use of these commands can cause the
g e n e r a t o r t o m a l f u n c t i o n . A n i r r e v e r s i b l e l o s s o f u s e r -
programmed data may also occur.
ADDR
ADDRess
BASE
BASE (radix)
BOOT
warm BOOT
CALL
CALL internal function
DCRD
Display Code ReaD
GETA
GET data from Absolute memory location
GETR
GET data from Relative memory location
INIT
INITialize to factory-default settings
PUTA
PUT Absolute
PUTR
PUT Relative
SCAL
Self CALibrate
SIZE
SIZE of bit field
*WAI
WAIt for completion suffix
Summary of Contents for 801GC, 801GF, 801GX
