20
| Operation
|
Ultra
Version M 22-April-2012
7.0 Remote Box Menu,
Detailed Descriptions
After power-up and initialization, the Remote Box displays the Main menu.
Main Menu
All menu lines except “configuration #” are used to access the
corresponding sub-menus. Because the LCD can display only four lines
at a time, there sometimes are additional lines that are not visible until
you scroll the cursor down to view them.
Note:
Command lines that must be
scrolled into view
are shown here
dimmer than the commands that are first visible when the menu is first
entered.
configuration 1
>Flashlamp
Q-Switch
System Info
The first four items from the Main menu are:
configuration #:
There are up to four user-defined
configurations available. Each configuration includes all the
available adjustable laser parameters such as laser energy and
pulse repetition frequency. To load other configurations, use the
“Increase/Decrease Value” buttons.
Flashlamp:
Use the flashlamp menu to modify or view the
flashlamp operating parameters such as Pulse Repetition
Frequency (PRF) or flashlamp energy and flashlamp sync.
Q-Switch:
Use the Q-Switch menu to modify or view the Q-Switch
parameters such as flashlamp-to-Q-Switch delay and Q-Switch sync.
System Info:
The System Info menu displays information such
as temperature measurements, interlock displays and pump menu
options.
Saving Configurations
The “save #” selection allows you to save a configuration. Saved
configurations preserve all the laser parameters in the ICE450 non-volatile
memory. Once saved with a configuration number, these parameters may be
recalled at any time, even after the system has been powered off.
configuration 1
Flashlamp
Q-Switch
System Info
>
save
1
Once you are satisfied with all the parameters for a laser setup, use the
following steps to save the configuration:
From the Main menu, scroll to select “save #”.
Use the “Increase/Decrease Value” buttons to set the desired
configuration number.
Press the “Enter Menu” button.
A message appears confirming that you have successfully saved the
configuration.
REMOTE BOX BUTTONS
Cursor UP
Cursor DOWN
Increase Value
Decrease Value
Enter Menu
button
LCD Display
