Quadra-Fire • QFP44 • 4051-300 • Rev. U • 4/11
56
• Position the right front log over the grate bars, aligning
the cut outs on the bottom of the log with the bars. See
Figure 15.12
Figure 15.12 Positioning Right Front Leg
• Position the cutout on the bottom of the left log over the
locating bracket on the grate. Push the top of the rear
log back against the back refractory and position the left
log on the fl at area of the rear log. See Figure 15.13.
Figure 15.13 Positioning Left Log
• Position the right log over the locating bracket on the
grate and position the end on the fl at area of the rear
log. See Figure 15.14.
Figure 15.14 Positioning Right Log
• Place the end of the right middle log on the fl at area
on the ember bed and position the hole in the log over
the exposed locator pin on the front log. See Figure
15.15.
Figure 15.15 Positioning Right Middle Log
• Place the end of the left middle log on the fl at area of
the ember bed and position the hole in the log over
the exposed locator pin on the front log. See Figure
15.16.
Figure 15.16 Positioning Left Middle Log