Quadlogic MiniCloset-5c, Installation Manual

Page: 72 / 117

Chapter 7 Communications
© COPYRIGHT 2009
Quadlogic Controls Corporation
68
The YYYYDate.Time lists the end of interval time stamp and is read left to right in a similar
fashion to the mdw_-L table. Each number, reading left to right indicates the peak kW
reading for the next 15minute interval as shown below. For example, the peak kW at the
interval period ending at 04:00AM on 4/15/2005 was 2.64.
The characters “xxxx.xxx” denotes no power to the meter at the end of the interval.
2) Space Delimited Form
Entering the command mdw<enter> will list all the interval log data (for all billing
parameters) in a space delimited format. It may be captured and for input in to various
other software platforms.
3 ) Excel Spreadsheet Form
Entering the command mdw_-E<enter> will list all interval log data in a format that can be
imported into Excel. The date column will then need to be formatted to an Excel format.
20050415.0015= Period
ending on April 15, 2005
at 12:15am
The unmultiplied kW
reading at this time was
3.41kW
1
2:30am 1
2
:45am
1
:00am 1
:
15am
Numbers indicate the unmultiplied peak kW readings at the following times: