Quadlogic MiniCloset-5c, Installation Manual

Page: 11 / 117

Chapter 2 About the MiniCloset-5c
© COPYRIGHT 2009
Quadlogic Controls Corporation
7
S
PECIFICATIONS
Metering Specifications
Metered Voltage:
Secondary Current Input:
Programmable:
Four Quadrant Consumption &
Delivered and received
Demand for each of the 24 channels:
Programmable Interval Data &
Data and Peak Demand:
Demand Reset:
Real-time data per Phase:
Time-of-Use:
Data Collection Options:
Pulse Datalogger Module (PDM-12):
Distance:
Interrogating Signal Specifications:
120, 208, 220, 230, 240, 277, 347, 380, 400, 416, 480,
600 VAC
Delta or Wye, 50/60 Hz
0.1 Amp or 5 Amp CT inputs available
(8) 3-phase meters, (12) network meters, or (24)
single-phase meters (number of meter points available will
vary by model)
Delivered and received: kW, kVARLeading,
kVARLagging, kVA, Volts-squared hours, and amp-squared
hours
5 minutes to hourly time window (longer time intervals also
available)
Meter total and/or by phase
Programmable to user-determined specific time blocks or
rolling time block demand
Allows local reset of peak demand (kW) register
Voltage, current, phase angle, power factor, THD, watts,
VARs, VA, and frequency
Up to 16 blocks per day available for all metering
parameters (Exception: Pulse input data)
IQ Software
MV-90 TIM Module
ASCII-based, open-data protocol
Open-source data conversion program
Collects data from up to 12 water, gas, or BTU meters
Form A Dry Contact Inputs
PDM connects to MiniCloset-5c via CAT5
Maximum 4 PDM units to a MC-5c (daisy chain)
Total of 48 discrete inputs total
Pulses will count during a power outage
Pulses can be logged in programmable intervals
Power supplied by MiniCloset-5c
Pulse meter to PDM - 300’ max.(18 gauge min.)
All 4 PDM’s to MC-5c - 300’ CAT5 cable
Min. Pulse Width:
Power on - 50 msec.
Power off - 500 msec.*
Max. Pulse Rate:
Power on - 10 pulses/sec max
Power off - 1 pulse/sec max
Peak voltage: 5.5V
Peak current: not applicable
Isolation: The interrogating signal is completely isolated
from the AC line, with isolation barriers rated for
at least 2.5 kV.
Max. signal debounce tolerance: 20 msec.