Quadlogic MiniCloset-5c, Installation Manual

Page: 77 / 117

© COPYRIGHT 2009
Quadlogic Controls Corporation
73
C
HAPTER
9
R
EPAIR AND
S
PARE
P
ARTS
R
EPAIR OR
R
EPLACEMENT
Quadlogic requires prior approval and an assigned RMA (Return Merchandise Authorization)
number before accepting any merchandise returns. An RMA request form which includes
complete repair and/or return for credit policies can be found on our website at
www.quadlogic.com. If you are returning equipment for credit, a 20% restocking fee shall
apply. Note: RMA shipping charges to Quadlogic are the responsibility of the product owner.
Quadlogic will return merchandise back to the customer via UPS Ground at no charge.
(International Customers: Quadlogic will pay for standard cost of clearance through duties
and customs for receipt of authorized return merchandise only. Clearance through duties
and customs is the customer’s responsibility for return shipments.)
S
PARE
P
ARTS
Below is a list of spare parts that can be purchased by a customer in the event that a part of
a MiniCloset-5 meter has been damaged.
A. Meter Head – Main component of the MiniCloset-5c. The Meter Head contains the Meter
Module, through which all signals transmit, events are recorded and meter data is stored.
B. Fuse Block – Provides termination for the voltage taps. It supplies power and fuse
protection to the Meter Head.
C. MC-5c Back Box – Metal box housing the metering device and the MCI board.
D. MCI – MiniCloset Interface, provides termination for the current transformers (CT).
E. Communications Module (option)