Quadlogic MiniCloset-5c, Installation Manual

Page: 71 / 117

Chapter 7 Communications
© COPYRIGHT 2009
Quadlogic Controls Corporation
67
Access to daily accumulation log is gained by entering mdt_-d<enter>.
III . Mass Memory/Data Log
Access to interval data can be gained in three (3) different formats: 1) By parameter and
day, 2) Space delimited form, and 3) Excel spreadsheet format.
1) By Parameter and day
a. Enter mdt_-m<enter> for the configuration table.
b. Enter mdw_-L<enter> for a list of dates in the log.
c. Combine list to access day for specific parameter and day mdw_Q1_l2<enter>.
In the above table, “1#” represents the day number that corresponds to the listed date on
the right. The table works in a left to right sequence. For example, day 1#0 has no
corresponding date. Day 1#1 is 4/03/2005 and day 1#2 is 4/11/2005. The following line
lists day 1#4 as 4/13/2005 and so on.
Combine the desired Q# (Billing Quantity) and 1# (day number) to request the specific data.
The above table lists all the interval data for Q#1 (kW) on 1#6 (4/15/2005) in block form.