Quadlogic MiniCloset-5c, Installation Manual

Page: 15 / 117

Chapter 3 Parts and Options
© COPYRIGHT 2009
Quadlogic Controls Corporation
11
V. Interface with Quadlogic Software (IQ)
The Interface with Quadlogic (IQ) Program allows for easy access to all metering information
necessary for basic bill generation, daily load profiling and certain customer service functions
such as acquiring as needed reads for customers moving into or out of a designated location.
Various metering parameters (Voltage, Amps, Watts, kWh, k VARh, kVAh, Power Factor and
Phase Angle for one, two or three phases) can be viewed individually or in combination.
Meters can be logically clustered, and the group totals for most metering parameters can be
viewed as well.
Color graphs can be produced for Consumption and Daily Peak Demand, as well as Demand
Logs. The program is both easy to use and provides professional presentation material.
IQ is available for purchase from Quadlogic Controls Corporation.
IQ requires the following minimum hardware and software:
Hardware:

486 or Pentium based PC

32 MB RAM minimum (64 MB RAM recommended)

CD-ROM Drive

5 MB free space on the hard drive (for the program only)

SVGA 800x600 Resolution

Config.sys: files 50/buffers 15 minimum

Color monitor

Mouse

Keyboard

At least 2400 baud or compatible modem (for remote connections only)

Telephone line (for remote connections only)

Printer (recommended)
Operating System Software:
• Windows 98, Windows NT, Windows XP
(Note: IQ is not compatible with Windows Vista)