quadient DS-200iQ, Manual, Page: 99 / 231

Output Settings 4.7
Output settings control how certain outputs are used, whether by an Output Conveyor,
Turner, Franker, Printer, or a combination of these depending on the units installed and
configured within IMOS hardware units setup.
1. First select the output exit (e.g. Exit 1, Exit 2, or Exit 3) to be used for the output
setting, set batching to Batch On and then press Ok as shown below.
The Batch mode must also be set with the following options available:
- Stop - When the batch quantity is reached, the machine will stop until the
Run button is pressed to run another batch.
- Continue - When the batch quantity is reached, the machine will pause for
the specified Batch complete pause time and then resume running.
The Conveyor will continue to run.
97
| Page 97 | | May-29-2020 11:33 |
4
Operator
IMOS
Settings