quadient DS-200iQ, Manual, Page: 82 / 231

2. Edit the following advanced document settings as required:
Orientation
Press Auto to select a reading orientation from the list other than the default
setting Face up - Feet first . See section Reading Orientations on page 122 for
further assistance.
Deskew
- Off - Turn off if skewing is not occurring.
- Low - If skewing occurs, set to low if possible.
- High - Slows the machine down.
Thickness Doubles
Change default setting only if needed.
- Off
- On (auto)
- On (optical)
- On (mechanical)
The Flex Folder only has Off or On (mechanical) as an available
setting for Thickness Doubles.
Feed Control Mode
- Feed Always - Used for non-selective documents.
- Selective Feed - Used for reading-enabled units. Works in conjunction with
Select ID.
Select ID
Defines an ID number for a document in accordance with the Select mark in the
label. This will then feed the document when that mark is read (applies to
enclosures only).
Sequence Handling Mode
Determines how sequence marks (if used) are handled when a document set is
broken up (e.g. to change a job in the middle of a document set).
Set to
Full for the first pass, then change to Mailset for the second pass after the
job has been changed. The machine will then expect a broken sequence.
80
| Page 80 | May-29-2020 11:33 |
4
Operator
IMOS
Settings