quadient DS-200iQ, Manual, Page: 108 / 231

Saving the Job 4.8
1. Enter a Job name and Job description using the on-screen keypad as shown
below.
2. Select the Job number control mode from the following list of options:
- Not used
- Auto generated
- Manual entry (external checking)
- Manual entry (internal only) - Not used for AIMS jobs.
- Multi-job (continuous)
- Read from prime - This mode allows the job number to be read from the
first page being processed on the prime document channel. The prime
document channel is halted until inserter/IMOS has confirmed with AIMS
that it is a valid job and then continues processing.
When using the Read from prime mode, the software uses the
job number read for statistics and data logging.
- Read on output
3. Enter a Job number only if Manual entry is selected as the Job number control
mode . Otherwise Job number is disabled for all other modes.
106
| Page 106 | May-29-2020 11:33 |
4
Operator
IMOS
Settings