quadient DS-200iQ, Manual, Page: 16 / 231

Versatile Feeder Components
Versatile Feeder is a track mounted unit, with an end-station variant also available.
Up to 8 Versatile Feeder units may be fitted (7 if a Flex Folder unit is fitted). It feeds
enclosures such as short-form inserts (cards, reply envelopes, booklets), flyers etc, onto
the track for subsequent insertion.
Versatile Feeder is available with a single feed hopper only, holding up to 1000 80gsm
A4 inserts, with mark-reading variants available for OMR/Barcode/2D (top read only).
Flex Folder Components
Flex Folder is a folding unit and is only available as an end module. It can be fitted to
the Insert Head on its own, or in conjunction with Versatile Feeders. It folds documents
either separately or in groups, using an accumulator, and is fitted with various options
of feed pods (maximum of 2 feed pods).
Folding, including no-fold options may be set within IMOS, and
used for certain job types if required.
Flex folder uses a 3-plate folding mechanism, and 2D/BCR/ OMR reading is fitted as
standard, though a no-read option is also available on some variants.
Feed Pod
1 or 2 Feed pods may be fitted to the Flex Folder depending on the configuration, and
each pod consists of either of the following with mark-reading available as an option:
• 2 x 500-Sheet Hopper
• 1 x 1000-Sheet Hopper
Accumulator
Accumulator is optionally fitted to the Flex Folder and allows groups of forms to be
collated together before folding as a group, and is also fitted with a divert tray.
14
| Page 14 | May-29-2020 11:33 |
2
Introduction