AN-X-GENI Page
21
January 2008
The description for a module is defined by the keyword Desc= and can
be from 1 to 95 characters long. The description text must be enclosed in
double quotes, for example Desc="12/24VDC 32 Ckt Source I/O Block".
The part number and description are used for comments only. You can
put whatever you want in them.
Each definition ends with the keyword EndBlock, which is required.
Parameter
Keyword
Valid entries
Serial bus address
Block=
0-31
Input length, bytes
Inp=
0-128
Output length, bytes
Out=
0-128
Scan mode
Scan
Scan
Part number
Part=
Maximum 15 characters, enclosed
in double quotes
Description
Desc=
Maximum 95 characters, enclosed
in double quotes
End of block
definition
EndBlock
Examples:
Block=0,Inp=0,Out=0,,Part="IC660HHM501",Desc="Hand-held Monitor",EndBlock
Block=1,Inp=2,Out=2,Scan,Part="IC660BBR101",Desc="16-Ckt Normally-open Relay
Block",EndBlock
When AN-X creates a Genius I/O configuration file after an
autoconfiguration, it inserts part numbers and descriptions from its
internal module database.
Global Data Sent by AN-X-GENI
If the AN-X-GENI is to send global data on the Genius network, add a
line of the form
GlobSend=length
to the configuration file. The length can be from 1 to 64. NOTE: The
length of global data is in 16-bit words, not bytes.
Example:
GlobSend=4
Summary of Contents for AN-X-GENI
Page 59: ...AN X GENI Page 55 January 2008...
