Page
6
AN-X-GENI
January 2008
Quick Start
Step
See page
1
Install the AN-X Windows software
5
2
Power up the AN-X, connect it to Ethernet and use
AnxInit to assign it an IP address
7
3
(Not needed for existing installations) Use the
Genius hand-held monitor to assign serial bus
addresses to Genius devices and perform any other
necessary configuration.
4
Use the AN-X web interface to set the baud rate
and serial bus address for the AN-X-GENI
17
5
Connect AN-X to the Genius network
4
6
Use the AN-X web interface to autoconfigure the
Genius network and ControlLogix configuration
18
7
Configure the AN-X in RSLogix 5000
31
8
Use the web interface to obtain tags for RSLogix
5000
33
9
Import the tags into RSLogix 5000
34
10
Use the tags to access data
Summary of Contents for AN-X-GENI
Page 59: ...AN X GENI Page 55 January 2008...
