AN-X-GENI Page
49
January 2008
Using the Web Interface
The AN-X module contains a webserver capable of communicating with
standard web browsers such as Internet Explorer.
Use the web interface to:
•
set the baud rate and serial bus address for the AN-X-GENI
•
set the Genius bus I/O network configuration
•
set the ControlLogix scheduled data configuration
•
view the current configuration
•
view AN-X logs
•
view and clear faults from Genius blocks
To use the web interface, you need to know the IP address of the AN-X.
Use the Utilities/Locate All AN-X Modules command in AnxInit to find
all AN-X modules on the Ethernet network.
To access the web interface, start your web browser and type the AN-X
IP address where you normally enter web addresses in the browser.
Summary of Contents for AN-X-GENI
Page 59: ...AN X GENI Page 55 January 2008...
