AN-X-GENI Page
5
January 2008
Pin
Assignment
1
Not used
2
Shield out
3
Shield in
4
Serial 2
5
Serial 1
Ensure that the physical ends of the Genius I/O network are properly
terminated. The AN-X module does not have any internal termination.
WARNING!
Set the baud rate and serial bus address for the AN-X-GENI module
before connecting to the Genius network.
Ethernet Cabling
AN-X has a standard RJ-45 connector for connecting to Ethernet.
If you are connecting AN-X to an existing network through a router or
switch, use a standard Ethernet cable.
If you are connecting directly between a computer and AN-X, use a
crossover cable.
Software Installation
You must uninstall any previous version of the software before you can
install a new version. Use the Windows Control Panel Add and Remove
Programs to remove the old version.
Insert the CD supplied with the AN-X module and run the program
setup.exe on the CD.
Summary of Contents for AN-X-GENI
Page 59: ...AN X GENI Page 55 January 2008...
