EN
QSR SERIES
USER MANUAL - REV000A
13
QSR series
5 - Installation
Fig. 17
•
Thread one end of the cable through the lid’s bracket
(part. A).
• Pass the cable beneath the fixed guide of the tunnel (part. B).
• Hook the ends of the cable to the two springs (that are already mounted onto the moving body) (part. C).
• Final installation of the cable in the lid (part. D).
Ensure that the system is free to open and close without any mechanical hindrance.
5.5 - Mechanical check and adjustment of the system
5.6 - Installation of the cable in the lid
Fig. 16
•
The QSR propeller should be disconnected from power
.
• Take the ring off and remove the pin (part. A).
• unhook the actuator from the lever (part B), ensuring that the system is free to open
and close without any mechanical hindrance
.
WARNING:
when the actuator is manually unhooked, the thruster com
-
pletely comes out due to its weight, therefore ensure that nobody is in the
nearby.
fig. 16
A
B
Follow the sequence described below to verify the opening of the hatch:
F
fig. 17
D
GUIDE
STEEL
CABLE
TUNNEL
SPRINGS
LID’S BRACKET
STEEL CABLE
A
B
C
Summary of Contents for QSR Series
Page 2: ......
